sip door phone SIP 2.0 door phone Support PoE KNZD-42
Specifications
As Public telephone for indoor or outdoor, elevator phone, Taxi or bus stands or station, Highway call box. Railway, metro, ATM machines side, Tunnel, Port, Dock, Mines, Generation facilities….
DTMF(Dual Tone Multi Frequency)
Standard and SMART Analogue and VoIP-SIP options available
Matching with most PABX,PBX and PAX systems.
The IP Intercom/door phone will be designed to work on apartment, hospital, school, metro…Housed in robust metal body, vandal resistant and tamper-resistant. FDSP ensure voice loud and clear. Good looking, durable, easy to install, comfortable buttons, and low power consumption.
introduction:
The IP Intercom/door phone will be designed to work on apartment, hospital, school, metro…Housed
in robust metal body, vandal resistant and tamper-resistant. FDSP ensure voice loud and clear. Good
looking, durable, easy to install, comfortable buttons, and low power consumption.
Support G.711,G.729, etc. Codec voice intercom
Support SIP 2.0(RFC3261) and related RFC protocol
Unlock function (swipe or communication)
Visitor leave message Software upgrading on line or status Basic Function WEB remote management of Terminal malfunction
Calling indoor extension for two-way conversation
Support SIP 2.0(RFC3261) and related RFC protocol
Web Business Management
It is mainly used for remote management KNZD-42
voice access device, which includes such features
as the device parameter management, access
control parameter settings, card, log management.
Access Control
Access control is consist of KNZD-42 voice access
control, exclusive DC power supply and electric
lock . Inside of KNZD-42 , self-powered electric
lock can directly drive the starting current of 500mA
power locks; additionally you can also access
exclusive external DC power supply and the voice
access output control signals , to drive electric lock
on and off by access exclusive DC power.
Intercom function
KNZD-42 voice intercom system consists of
KNZD-42 access control, SIP phones, phones
installed SIP soft-terminal, IPPBX . KNZD-42
Voice Access supports standard SIP protocol,
and has good system compatibility with main
IPPBX in the market
| Communication protocol | SIP 2.0(RFC-3261) | |
| Master Chip | Broadcom 1190 | |
| Keys | Design | Stainless steel |
| Direct-button | 1 | |
| Numeric Keypad | Optional | |
| Voice | Microphone | 1 |
| Amplifier | 0.5W-10W | |
| Speaker | 2W | |
| Volume Control | Adjustable | |
| FDSP | Support(AEC) | |
| Voice stream | Supportable Protocol | RTP/RTSP |
| CODEC | G.711, G.729 | |
| Port | Power Supply | 12V+-15%/1A DC or PoE |
| PoE | PoE 802.3af (Class 0 - 12.95W) 48V/380mA | |
| LAN | 10/100BASE-TX s Auto-MDIX, RJ-45) | |
| Cables | HSYV or better | |
| Passive Switch | Normally Open and Normally Closed highest at 30V/1A AC/DC | |
| Active Switched Output | 12V/500mA DC | |
| Rs232 | Supported | |
| RFID/IC Card Reader | Optional | |
| Interface | Power supply | 12V+-15%/1A DC or PoE |
| PoE | PoE 802.3af(Class 0-12.95W) | |
| LAN | 10/100BASE-TX s Auto-MDIX,RJ-45 | |
| Recommended cabling | Cat-5e or higher | |
| Passiveswetch | NO and NC contacts,up to 30V/1A AC/DC | |
| Actice switch output | 12V/700mA DC | |
| Structure | Shell Material | Cold Rolled Steel |
| Operating Temperature | -40 C to55 C | |
| Working Condition Relative Humidity | 10%-95% | |
| Storage Temperature | -40 C to70 C | |
| Installation | Embedded installation (pre-burying) | |
| Size | 159*130*40mm | |
